Top 4 Innovations that Make Modern Replacement Windows the Best Ever

In the past 60 years, replacement windows in San Diego, CA have come leaps and bounds, specifically in areas of efficiency, safety, durability, maintenance, and aesthetics. Residents in newer homes might take some of these advancements for granted. But if the windows of your home are more than 20 years old, you might be surprised by all the benefits you are missing out on. Modern products are better than ever. Here are just four innovations that have really improved in the last few decades:

replacement windows in San Diego, CA

1. Window Frame Materials

Wood and aluminum window frames were the standards of the past, and there wasn’t much else to choose from. Today you have wood, aluminum, vinyl, fiberglass, and composite window frames. Wood windows till tote an aesthetic that is classic, traditional, and unmatched by most other materials. They are also naturally efficient. But wood window frames are expensive and require more upkeep. Aluminum windows are strong, durable, lightweight, and impact-resistant. That said, they are not as good at insulating, and manufacturers have had to use thermal breaks for better insulation. Vinyl windows are perhaps the most affordable and most popular on the market today. They are made from polyvinyl chloride (PVC) that is weather resistant, energy efficient, and practically maintenance free. Window experts consider fiberglass windows to be the best of the best. They combine many features of the other materials offering strong, durable, paintable, lightweight, and long-lasting window frames. You pay more up front for fiberglass windows, but the longevity of these products often makes them worth it.

2. Laminated Glass

Safety or impact-resistant glass is another modern innovation used on replacement windows. Manufactures adhere a thin layer of polyvinyl butyral (PVB) to two panes of glass through heat and pressure. So instead of shattering into large, dangerous shards impact glass breaks into small pieces that remain largely intact. This innovation improves safety and also security in the home because they are much more difficult to break into.

3. Multi-Pane Windows with Inert Gas Fills

The standard for most windows is two panes of glass or double-glazing. The two panes of glass are sealed together with a gap between and act as an insulated glazing unit (IGU). For a time manufacturers sealed normal air between the panes. But because it still reacted to temperature changes, seal failure on these units was a common result. Today manufacturers use one of three noble gasses between the panes. They are non-toxic, odorless, and colorless. But they have a higher density than normal air and do not react in the same way. They also slow down heat transfer, making modern replacement windows more energy efficient.

4. Low-E Coatings

Modern windows also have special coatings designed to reflect unwanted radiant heat. This keeps home cooler in the summer and warmer in the winter. The special coatings are applied to different surfaces of the glass, depending on the desired outcome. But because it is an ultra-thin layer of metallic oxide, it is practically invisible.

These are some significant advancements in the window industry. If you want to take advantage of these benefits it is time to get replacement windows in San Diego, CA. Contact Pelican Replacement Windows at (760) 598-6422 or visit 2210 La Mirada Dr., Vista, CA 92081.

Posted in Replacement Windows | Comments Off on Top 4 Innovations that Make Modern Replacement Windows the Best Ever

5 Most Common Problems with Old Windows

Windows in the home help improve energy efficiency, protect the home from the elements, provide light and ventilation, and contribute to the aesthetics both inside and outside. That said, windows are often one of the most neglected features of a home. Homeowners don’t pay them much attention until something starts to go wrong. And as windows age, there are a number of problems that can require window replacement in San Marcos, CA. Here are just a few of the most common to watch for:

window replacement in San Marcos, CA

1. Broken Window Panes

It seems obvious, but still, many homeowners ignore a broken pane on their windows because only the outer pane is broken. They don’t think this has a big impact on the window. The truth is, a broken pane can mean leaks. And leaks can be expensive energy losses depending on the location of the window and the size of the damage. Also, cracks can start small and grow into a much larger problem, especially if it goes unnoticed. If you do notice a crack on an old window, you should get it replaced as soon as possible.

2. Water and Air Leaks

Over time and due to exposure to the elements and fluctuating temperatures, the seals on windows start to corrode and break down. Seal failure is often unnoticeable until you start seeing condensation between the panes, water damage, or a skyrocketing energy bill.

3. Sticky or Stubborn Window Operation

Have you ever had to muscle a window open or closed? This is a common problem with older windows as debris builds up on the tracks, parts break down, and frames start to warp. But a sticky frame is more than just a standard annoyance. It can be a true safety hazard if you need to use that window as an exit during an emergency. You can repair some sticky windows by cleaning the track and lubricating it with a silicone spray. But if the problem remains you might have a warped frame or damaged mechanics, and a replacement window is the only solution.

4. Damaged Frames and Dilapidated Screens

Old window frames are more prone to fading, warping, chipping, denting, and rot. And while the initial problem may start off small, damage can spread and eventually windows will look so rundown it can age the rest of your home. Aesthetics may seem superficial, but if a window looks worn out it probably has several other more functional problems as well.

5. Noise Penetration

Few people realize how noisy their old windows are. That is until they get replacement windows and can make the comparison. But if you live by an airport, busy street, or public park the transmission of noise will be more obvious. Just as old windows let in air and moisture, they can also allow noise to pass right through.

If your old windows show signs of some of these problems, it is time to think about window replacement in San Marcos, CA. At Pelican Replacement Windows we can help you find the right products and upgrades to suit your needs and your budget. Contact us at (760) 598-6422 to schedule an appointment. Or visit us at 2210 La Mirada Dr., Vista, CA 92081.

Posted in Replacement Windows | Comments Off on 5 Most Common Problems with Old Windows

Problems You Can’t Solve with Window Repair

Over time, due to use and exposure to the elements, windows will fall into disrepair. Parts wear out and break down. Materials corrode. Caulking wears out, frames rot or warp, and efficiency declines. And while there are some things you can repair, like damaged weather stripping or minor defects, in some cases, you will need window replacement in San Marcos, CA. Here is some helpful information about window repair and replacement windows.  

 window replacement in San Marcos, CA

Some Problems You Can’t Fix With Window Repair 

Here are just a few problems you may  not be able to correct with window repair:   

Minor Defects 

You can repair defects in the appearance on wood and fiberglass windows using sanding, putty, wood filler, or paint. In fact, you can sand and refinish these products whenever you choose. The same cannot be said for vinyl and aluminum windows. With these you will have to deal with dents, marring and scratches until you are ready for window replacement.   

Stubborn Hardware 

Do you have broken or sticky hardware on your old windows? In some cases these are easy to replace and the cost is pennies compared to the cost of a replacement window. That said, old windows might be outdated enough that it becomes impossible to find replacement parts. Instead, you might need to get a new window.   

Foggy Windows 

Moisture on the exterior surfaces of your windows is not a major problem. It has more to do with temperature changes and humidity, and will usually clear on its own. But condensation between the panes is a problem. This is the result of seal failure on the insulated glazing unit (IGU). Air and moisture have filled the space between the glass and there is no other way to get rid of it aside from window replacement.   

Water Leaks 

Water near the window might come through a sash accidentally left open or from gaps around the frame. And moisture damage can lead to warping, rot, mold, and structural damage. This is not a problem you want to leave for long. Sometimes caulking can be a quick solution to stop water infiltration. But larger leaks will require replacement windows.   

Poor Efficiency 

There is also not much you can do for an old window that is a poor insulator. Luckily window technologies have come a long way in the last decades, especially when it comes to energy efficiency. The only way to take advantage of these upgrades is with replacement windows.   

Warped Frames 

As foundations settle and materials expand and contract due to temperature fluctuations, window frames can warp and tilt. Problems from warping can run anywhere from slightly inefficient to completely useless.  

If you need window replacement in San Marcos, CA contact Pelican Replacement Windows. We have been in the window and glass business for over 35 years. We continue to specialize in sales and window installation. Call our office at (760) 598-6422 to set up an appointment. Or stop by our storefront at 2210 La Mirada Dr., Vista, CA 92081 to check out some of our products.  

Posted in Replacement Windows | Comments Off on Problems You Can’t Solve with Window Repair

How to Avoid Overspending on Window Replacement in Oceanside, CA

New windows will make your home more comfortable and energy efficient. New windows will also improve safety, security, and the aesthetics of your home. But getting window replacement in Oceanside, CA is a major investment. But with so many options on the market, it can be hard to navigate which choices will bring you the best value and offer you the best return. Here are a few tips to follow if you want to avoid overspending on your replacement windows:   window replacement in Oceanside, CA

  1. Prioritize the Benefits you Want Most

Are you getting new windows to give your home a facelift before you sell? Are you looking to boost your energy savings? Or do you want windows that are going to last for another 30 years? All of these factors will largely influence the material, style, and glazing options on your new windows. And those will determine the cost. So be sure to write down your list of priorities and keep them in mind when you are making your selections.    

  1. Choose the Right Frame Material for your Budget

Four of the most popular frame materials on the market include vinyl, aluminum, wood, and fiberglass. Each material comes with unique pros and cons you need to think about. Vinyl windows are efficient, easy to maintain, weather resistant, and affordable. But they come in limited color options and don’t last as long as other materials. Aluminum windows are also durable, easy to maintain, and affordable. But they do not have the same energy performance as other options. Wood windows are beautiful and can enhance the aesthetic of any home. They are also naturally efficient. But these windows are more expensive and require more upkeep. Fiberglass windows are energy efficient, long lasting, and can be paintable. These do come at a higher cost, but many homeowners feel they offer a great value.   

  1. Stick with the Basics

Once you have settled on a window material you should choose the size, shape, and function of your windows. Your needs may vary from room to room, but keep in mind the more standard window styles will be more affordable. Picture and sliding windows usually have lower price tags. Single hung, double hung, and casement windows range in the middle. And larger installations like bay, bow, and garden windows will cost the most. If you are looking to save money choose standard window styles and sizes. And just because your windows are “standard” does not mean they won’t be beautiful and a huge improvement in your home.   

  1. Evaluate Different Glazing Options

When it comes to glazing technology you probably didn’t know you had so many options. You must consider the number of panes, the inert gas fills, and the special coatings used to improve efficiency. This is why sitting down with a window professional is so important. They can walk you through the pros and cons of all the products and help you find the right solutions for your needs and your budget.   

To get a quote from Pelican Replacement Windows contact us at (760) 598-6422. We can help you find the right window replacement in Oceanside, CA. Stop by our office today at 2210 La Mirada Dr., Vista, CA 92081.  

Posted in Replacement Windows | Comments Off on How to Avoid Overspending on Window Replacement in Oceanside, CA

Which Replacement Windows are Best for the Basement?

Without the right windows, your basement living space will feel just like a cave. The lack of light and ventilation will make the downstairs cold, dark, and gloomy. So if you want to make the basement a more livable space you could start with replacement windows in El Cajon, CA. But choosing replacement windows for the basement is not like choosing windows for the upper levels of your home. You have to consider space restraints and building codes before moving ahead on your project. Here are some of the most popular window styles to consider for your basement:  

replacement windows in El Cajon, CA

  1. Awning Windows

These windows work as you would expect from the name. They hinge at the top and the bottom pushes out to open, creating a small awning over the window opening. These are great for the basement because you can open them for ventilation, but still keep the elements outside, even if it is raining. Most homeowners choose to install awning windows higher up on the wall to let in more light.   

  1. Hopper Windows

These are another popular window style homeowners use in the basement. These windows are just like awning windows, only they hinge at the bottom and can open inward or outward. The latches and operation are simple and straightforward. Homeowners prefer these windows for basements that are partially above ground.   

  1. Clerestory Windows

These are fixed, narrow windows installed along the top of the wall near the ceiling. They allow homeowners to illuminate a large area of space and work especially well in the basement. You can choose to install just one or two clerestory windows, or a series of windows depending on how much natural light you want in your space.   

  1. Sliding Windows

For windows that must be installed inside a window well, sliding windows are the most popular design. They do not take up any extra space for inswing or outswing. And because they have larger openings they can usually meet the required building codes for egress windows. Homeowners typically install sliding windows in basement bedrooms and living areas.   

  1. Single Hung or Double Hung Windows

Like sliding windows, these are other window styles that do not require extra space to open and close. A single hung window features one pane that slides up and down over a fixed pane. On a double hung window, both panes are operable. While not as common as sliding windows, these are other options to consider if you want to install operable windows in your basement.   

For more information about the different window styles, and which will work best in your basement contact Pelican Replacement Windows. Our experts can help you find the right replacement windows in El Cajon, CA to install in your basement. Feel free to contact us at (760) 598-6422 to schedule an appointment. Or stop by our showroom at 2210 La Mirada Dr., Vista, CA 92081 and check out some of these products firsthand.  

Posted in Replacement Windows | Comments Off on Which Replacement Windows are Best for the Basement?