When is the Best Season for the Installation of New Windows in Carlsbad, CA?

windows in Carlsbad, CA

Getting new windows for your home is a large investment that brings several benefits. It lowers energy costs, improves safety, makes windows easier to maintain, and gives you better protection. But a lot of homeowners shopping for new windows want to know which season is best for installations. Here are a few things to consider when deciding on the best season for new windows in Carlsbad, CA:  

  1. Temperature

Caulking adheres differently if temperatures get too hot or too cold. That is why installers recommend you get new windows when it is warm, but not too warm. Luckily the weather in Carlsbad, CA is mild and rarely goes below freezing or above 80°F. These conditions are ideal for window installation almost any time of year.   

  1. Exposure

During window installation parts of your home are exposed to the outdoors for short periods of time. That is why most homeowners choose to get installations done when the weather is warm. That said, professionals can install windows in all types of weather conditions. They will remove the old window and immediately replace it with the new one, reducing the amount of exposure. They can also use tarps and sheeting to protect the opening if it does happen to rain during installation.   

  1. Installation Times

Preparations for inclement weather take more time. Installers have to be careful about cold and moisture getting into the home during installation. This slows the process and can extend the installation into an extra day or two depending on the severity of the weather. Moderate to sunny weather means workers can get the job done faster.   

  1. Safety

Another concern surrounding weather is safety. Tumultuous rain and thunderstorms can be dangerous for installers working on ladders and scaffolding. While summer thunderstorms are most common, winter storms can also be a problem for installation teams. If these crop up you might have to delay the installation of your new windows until the storm passes.   

  1. Scheduling

Many homeowners choose spring and summer for home improvement projects. This makes these months the busy season for most replacement window companies. Choosing to get windows replaced in fall or winter can make scheduling a little faster and more flexible because installers have greater availability.   

  1. Special Offers or Promotions

While it can be hard to pinpoint exactly when sales will offer promotions, you can usually count on getting better deals in the “off-season.” That said, you don’t want to put off window installation waiting for the cheapest deals. For the most part, quality windows will have similar pricing regardless of the time of year. Instead, your priority should be finding a reliable installer with quality products and brands. That way you can get windows built to last and installation you can trust to hold up for years to come.   

Finding the right time for new windows in Carlsbad, CA takes planning. Sit down with the professionals of Pelican Replacement Windows today to figure out when is the best time to schedule your installation. Call (760) 598-6422 to set up a consultation or stop by 2210 La Mirada Dr., Vista, CA 92081.

Posted in Replacement Windows | Tagged , | Comments Off on When is the Best Season for the Installation of New Windows in Carlsbad, CA?

What You Need to Know about IGUs on Replacement Windows

replacement windows in El Cajon, CA

Windows are one of the weakest links in the exterior envelope of your home and the common culprit for air leaks and energy losses. So if you want to start saving energy, windows are a good place to start. These devices of glass, framing material, and moving parts are exposed to some brutal elements. Insulating glass units (IGUs) on replacement windows in El Cajon, CA go a long way towards increasing the efficiency of these products. Here is what you need to know about this standard window technology:  

What are Insulating Glass Units?  

The reason it is called a unit is because all the parts depend on the others for the highest level of insulation. The five primary components of IGUs include multiple panes of glass (typically two or three), spacers, inert gas fills, sealant, and the window frame. Here is a quick breakdown of each feature:  

  • Glass: The standard for modern windows is two panes of glass, but some windows feature three or even four. Thickness ranges from 1/8” to 3/8” in various applications. Clear glass is most common, but homeowners can also choose tinted, laminated, low-E, reflective, and decorative coatings on the glass.  
  • Spacers: The spacer separates the panes of glass where they meet the frame so they remain held apart at an appropriate distance. Aside from that, the spacer also accommodates stress from pressure differences in thermal expansion and contraction. Spacers are usually aluminum with a desiccant coating to help absorb residual moisture. Spacers vary in width depending on the type of gas between the panes.   
  • Gas Fills: Each manufacturer uses a unique formula for the gas between the glass. Argon, krypton, and xenon are the most common. These noble gasses are chemically non-reactive. They have more density than normal air and improve the efficiency of the IGU.  
  • Sealant: To hold the unit together manufactures use two sealing systems. A single-seal system uses organic sealant, typically butyl material to seal the spacer to the glass. A double-seal system also has a butyl material behind the spacer but also has a secondary sealant, usually silicone, for extra strength.  
  • Window Frame: There are many variables to choose from, but perhaps the most important when making energy efficiency a priority is the frame material. Aluminum is strong and light, but more readily conducts heat. Wood windows are excellent insulators, but the maintenance on all wood window frames is expensive and time consuming. Vinyl window frames are some of the most affordable and are great insulators, but they don’t have the strength and durability of other materials. Fiberglass frames offer high thermal performance and strength and durability.  

Over Time IGUs Fail 

Eventually, the seals on IGUs will fail. This is due to a partial pressure differential between the noble class and outside air along with the thermal expansion of various materials. And if the seal fails it diminishes the efficiency of the window. Typically the noble gas leaks at a rate of about 1% per year. You might not notice right away, but over time moisture and particles will leech between the panes making the window appear hazy or foggy. And once that happens you need window replacement.   

Looking for the best replacement windows in El Cajon, CA? Call Pelican Replacement Windows at (760) 598-6422. Our experts can help you navigate all the variables and find the best solutions for your home. Stop by 2210 La Mirada Dr., Vista, CA 92081 today.

Posted in Replacement Windows | Tagged , | Comments Off on What You Need to Know about IGUs on Replacement Windows

Most Common Reasons You Need Del Mar, CA Window Replacement

Del Mar, CA window replacement

Windows are an essential part of your home. They allow in light and ventilation, but also protect your home against intruders and the elements. But if your window breaks down it can result in drafts, high energy bills, moisture leaks, and a lack of protection. Any of these causes could result in the need for Del Mar, CA window replacement  

Poor Installation 

A top cause of premature window failure is a faulty installation. Some homeowners try to handle this home improvement on their own, but what they don’t realize is one small mistake during installation could render the new window completely useless. That is why it is important to leave the measurements and installation to the professionals. It is the best way to ensure proper fit and lower the risk of window failure.   

Improper Maintenance  

Another common cause of window failure is poor maintenance. Taking care of your windows means more than washing the glass. You should examine your windows once a month looking for signs of damage. You should also perform general maintenance tasks like clearing and lubricating the track to make sure operation is smooth and easy. And there is no need for harsh chemicals or abrasives. Clean your window frames with mild detergent, water, and a soft cloth.   

High Moisture Levels 

Moisture can cause rust, warping, rot, and mold. Fortunately, most window materials resist water damage, but you still want to be careful about condensation and leaks. Because while the water may not hurt vinyl, fiberglass, or aluminum windows directly, it can leak into the walls and floor causing structural damage to your home.   

Extreme Fluctuations in Temperature 

Most materials change structure, shape, area, and volume in response to temperature changes. And years of extreme temperature changes can break the seals on your windows, causing failure.   

Pest and Insect Infiltration 

In warmer regions, pest infestation can be a major problem for homeowners. Critters and insects who try to gain access to the home can cause damage to siding, windows, doors, and other structures of the home. That is why it is important to check windows and doors for signs of scratching, scraping, digging, or dry rot.   

Accidental Damage 

Windows can literally take a beating, and not just from the elements. The blunt force from a ball, toy, or piece of furniture can break the glass and damage window frames. Window repair might be an option, but for extensive damage, you might have to consider window replacement.   

Age 

Due to exposure to the elements, the materials on your windows will start to break down. Most windows last an average of 20 to 30 years before you start noticing moisture leaks, air infiltration, and higher energy bills. That is when you know it is time to upgrade to more energy efficient products.   

Call the Experts at Pelican Replacement Windows. We have been providing window replacement in Del Mar, CA and the bay area since the early 1980’s. We offer premium windows and the highest level of customer service. Call us at (760) 598-6422 to schedule your consultation or stop by 2210 La Mirada Dr., Vista, CA 92081.

Posted in Replacement Windows | Tagged , | Comments Off on Most Common Reasons You Need Del Mar, CA Window Replacement

Do I Want Single Hung or Double Hung Windows?

windows in Solana Beach, CA

Because it is a coastal climate, windows in Solana Beach, CA don’t usually last more than 25 years. You might one day look at your windows and notice they are starting to get old and worn. It might be time for replacement windows. And with that decision also comes an opportunity to change the window style to better match the style and functionality you want for your home. It is a big decision, and because windows are a large investment you want to have as much information as you can about your options. So here is what you should know about single hung and double hung windows:   

Single Hung Windows vs Double Hung Windows 

When most people picture a window in their mind, they invasion these window styles. These are some of the oldest, most traditional windows on the market. Single hung windows feature two sashes, where the bottom sash is operable and moves up and down over the fixed top sash. On double hung windows both sashes move up and down and often tilt in as well.   

Pros and Cons of Single Hung and Double Hung Windows 

A few of the advantages of disadvantages of these window styles include:  

Cost 

Single hung windows are often popular because of cost. They are more affordable than double hung windows, the difference in cost being anywhere from 10 to 20 percent. Installation costs on single hung windows are also cheaper. That might not seem like much when replacing a single window but can make a great difference when you think about replacing a dozen or so windows.   

Cleaning and Maintenance 

Single hung windows are not as easy to clean. The bottom sash might tilt in, but you will still need to access the upper sash from the outside. Double hung windows often feature a tilt in option on both sashes. This makes for easy cleaning and maintenance.   

Ventilation 

Both window styles offer great ventilation, but double hung windows are slightly better. They open from the top and bottom. This means cool air can come in through the bottom while warm, humid air gets pushed out the top. This natural ventilation is great for generating more airflow, getting rid of humidity, and unwanted odor.   

A/C Friendly 

If you need window-mounted air conditioners, these window styles are an ideal choice. Because they slide up and down to open and close, they can safely house A/C units in place.   

Energy Efficiency 

The most efficient window styles are usually fixed windows with no breaks. Next would be casement windows because the entire pane locks against the frame when shut. Next would probably be single and double hung windows. Because of sash operation, these windows are not as air-tight. That said, modern advancements have made these windows more efficient than ever.   

Where can I Install Single and Double Hung Windows?  

These windows can work well in almost any room in the house. Homeowners commonly use these window styles in kitchens, living rooms, bedrooms, and even bathrooms. They also work well when flanking a larger picture window so you can get a great view, natural light, and some ventilation.   

Find a Reliable Contractor for Single and Double Hung Windows 

If you are looking for top of the line brands for windows in Solana Beach, CA contact Pelican replacement Windows. You can reach us at (760) 598-6422 or visit 2210 La Mirada Dr., Vista, CA 92081 to check out some of our product lines today.   

Posted in Replacement Windows | Tagged , | Comments Off on Do I Want Single Hung or Double Hung Windows?

8 Tips to Get the Outside of Your Home Ready for Fall and Winter

window replacement in Oceanside, CA

While temperatures remain fairly moderate in the area and hardly drop below freezing, you still want to make sure your home is ready for the changes in seasons. Fall is still a time of transition. It is a great time to clear away all the grime and buildup of summer and get your home ready for a cozy winter. From repairing the roof to getting window replacement in Oceanside, CA, here are a few things you can do outside to prepare for colder weather:  

  1. Repair Roof Leaks

Your roof protects your home. After spring and summer, you want to be sure there are no signs of leaks before winter. Check for signs of discoloration along the ceilings on the top floor or in the attic. If you do spot a leak reach out to a roofing company to repair it.   

  1. Clean the Gutters

The gutters and downspouts help direct water away from your home and the foundation. They need to be firmly attached to the house and clear of debris. If you notice anything the downspouts or clogged or a piece is missing, repair it right away.   

  1. Clean Outdoor Furniture

In Oceanside, CA you have a patio season that can extend well into fall and winter. If your outdoor furniture saw a lot of use in the summer, you might consider giving it a good scrub and maybe some fresh paint.   

  1. Trim Back Trees

Do you have limbs and tree branches hovering over your roof? If so, it might be time for some pruning. Cutting back trees in the fall prepares them for the added growth of next spring. It also can limit the risk of breakage and accidental damage to your home.   

  1. Add Mulch to Flowerbeds

Adding extra mulch to the flowerbeds in fall has several benefits. It helps protect the soil and plants and provides some insulation in the colder months. It also reduces the growth of weeds.   

  1. Clear Debris from Outdoor A/C Unit

If you want your heating and cooling to run efficiently all year long you need to make sure your outdoor unit has three feet of clearance. Dried leaves, grass clippings, dirt, bushes. These can restrict airflow. So while you are tidying the yard preparing for winter, make sure you give your HVAC system a little attention.   

  1. CheckWeather Stripping 

Have you noticed any light coming through between the door and door frame? This means your weather stripping is not doing a proper job. It is meant to seal your home and prevent air leaks. Simply replacing the weather stripping can save you money on your energy bills.   

  1. ApplyWindow Caulking 

While you are inspecting your doors you should also look at your windows. If there are signs of seal failure you can apply a layer of caulk for better protection. But if your windows are more than 25 years old it is likely time for replacements.   

If you need window replacement in Oceanside, CA call us today at (760) 598-6422. The milder temperatures of fall make it a great time to invest in new windows if you need them. The experts of Pelican Replacement Windows offer the highest level of customer service. You can get great products at a fair price. Stop by 2210 La Mirada Dr., Vista, CA 92081.  

Posted in Replacement Windows | Tagged , | Comments Off on 8 Tips to Get the Outside of Your Home Ready for Fall and Winter